·Specially made of imported excellent tool steel,the cutter is very durable.lts installment is adjustable and it can

    be sharpened for many times when.

·Becoming blunt,so it can be repeatedly used for every long time.

·The cutter stand is made of T7 quality steel,which has moderate tear .Even screws used to fasten the stand are

    made of high strength stee (8.8) Main body of the machine is made of A3T quality structural steel,which attrib-

    utes greatly to such a stable performance of the machine that it won nont br affected by broken stuff even after

     a long time of using .

·The axis bore of the main body and the two ends of the machine are of once-through process by the highprec-

    ision jig boring machine to ensure that the

·Concentricity and the verticality errors are not more than 0.05 mm. Each part of the machine has datum they

    have high interchangeability and precisions.

·It is equipped with heavy-loading bearings and a double-sealed crushing chamber.the clerance be teen two

    coordinating cuttings is less than 0.55mm to prevent crushed powder from leaking into the bottom of the be-

    aring stand, which will over-burden the motor. Therefore ,it helps to shoot the major。

·Trouble of the crushing machine .

·The front and back parts of the crushing chamber are double soundproof and the intermediate is also stuffe with

    soundproof material.which can resuce The noise to a very low extent .

·Motor is provided with an over-loading protection device and a protection system linked with power to guaran-

    tee safety.